# Port Forwarding Port forwarding lets developers securely access processes on their Coder workspace from a local machine. A common use case is testing web applications in a browser. There are three ways to forward ports in Coder: - The `coder port-forward` command - Dashboard - SSH The `coder port-forward` command is generally more performant than: 1. The Dashboard which proxies traffic through the Coder control plane versus peer-to-peer which is possible with the Coder CLI 1. `sshd` which does double encryption of traffic with both Wireguard and SSH ## The `coder port-forward` command This command can be used to forward TCP or UDP ports from the remote workspace so they can be accessed locally. Both the TCP and UDP command line flags (`--tcp` and `--udp`) can be given once or multiple times. The supported syntax variations for the `--tcp` and `--udp` flag are: - Single port with optional remote port: `local_port[:remote_port]` - Comma separation `local_port1,local_port2` - Port ranges `start_port-end_port` - Any combination of the above ### Examples Forward the remote TCP port `8080` to local port `8000`: ```console coder port-forward myworkspace --tcp 8000:8080 ``` Forward the remote TCP port `3000` and all ports from `9990` to `9999` to their respective local ports. ```console coder port-forward myworkspace --tcp 3000,9990-9999 ``` For more examples, see `coder port-forward --help`. ## Dashboard > To enable port forwarding via the dashboard, Coder must be configured with a > [wildcard access URL](../admin/configure.md#wildcard-access-url). If an access > URL is not specified, Coder will create > [a publicly accessible URL](../admin/configure.md#tunnel) to reverse proxy the > deployment, and port forwarding will work. > > There is a > [DNS limitation](https://datatracker.ietf.org/doc/html/rfc1035#section-2.3.1) > where each segment of hostnames must not exceed 63 characters. If your app > name, agent name, workspace name and username exceed 63 characters in the > hostname, port forwarding via the dashboard will not work. ### From an coder_app resource One way to port forward is to configure a `coder_app` resource in the workspace's template. This approach shows a visual application icon in the dashboard. See the following `coder_app` example for a Node React app and note the `subdomain` and `share` settings: ```hcl # node app resource "coder_app" "node-react-app" { agent_id = coder_agent.dev.id slug = "node-react-app" icon = "https://upload.wikimedia.org/wikipedia/commons/a/a7/React-icon.svg" url = "http://localhost:3000" subdomain = true share = "authenticated" healthcheck { url = "http://localhost:3000/healthz" interval = 10 threshold = 30 } } ``` Valid `share` values include `owner` - private to the user, `authenticated` - accessible by any user authenticated to the Coder deployment, and `public` - accessible by users outside of the Coder deployment. ![Port forwarding from an app in the UI](../images/networking/portforwarddashboard.png) ## Accessing workspace ports Another way to port forward in the dashboard is to use the "Open Ports" button to specify an arbitrary port. Coder will also detect if apps inside the workspace are listening on ports, and list them below the port input (this is only supported on Windows and Linux workspace agents). ![Port forwarding in the UI](../images/networking/listeningports.png) ### Sharing ports We allow developers to share ports as URLs, either with other authenticated coder users or publicly. Using the open ports interface, developers can assign a sharing levels that match our `coder_app`’s share option in [Coder terraform provider](https://registry.terraform.io/providers/coder/coder/latest/docs/resources/app#share). - `owner` (Default): The implicit sharing level for all listening ports, only visible to the workspace owner - `authenticated`: Accessible by other authenticated Coder users on the same deployment. - `public`: Accessible by any user with the associated URL. Once a port is shared at either `authenticated` or `public` levels, it will stay pinned in the open ports UI for better accessibility regardless of whether or not it is still accessible. ![Annotated port controls in the UI](../images/networking/annotatedports.png) The sharing level is limited by the maximum level enforced in the template settings in enterprise deployments, and not restricted in OSS deployments. This can also be used to change the sharing level of `coder_app`s by entering their port number in the sharable ports UI. The `share` attribute on `coder_app` resource uses a different method of authentication and **is not impacted by the template's maximum sharing level**, nor the level of a shared port that points to the app. ### Configure maximum port sharing level (enterprise) Enterprise-licensed template admins can control the maximum port sharing level for workspaces under a given template in the template settings. By default, the maximum sharing level is set to `Owner`, meaning port sharing is disabled for end-users. OSS deployments allow all workspaces to share ports at both the `authenticated` and `public` levels. ![Max port sharing level in the UI](../images/networking/portsharingmax.png) ### Configuring port protocol Both listening and shared ports can be configured to use either `HTTP` or `HTTPS` to connect to the port. For listening ports the protocol selector applies to any port you input or select from the menu. Shared ports have protocol configuration for each shared port individually. You can access any port on the workspace and can configure the port protocol manually by appending a `s` to the port in the URL. ``` # Uses HTTP https://33295--agent--workspace--user--apps.example.com/ # Uses HTTPS https://33295s--agent--workspace--user--apps.example.com/ ``` ### Cross-origin resource sharing (CORS) When forwarding via the dashboard, Coder automatically sets headers that allow requests between separately forwarded applications belonging to the same user. When forwarding through other methods the application itself will need to set its own CORS headers if they are being forwarded through different origins since Coder does not intercept these cases. See below for the required headers. #### Authentication Since ports forwarded through the dashboard are private, cross-origin requests must include credentials (set `credentials: "include"` if using `fetch`) or the requests cannot be authenticated and you will see an error resembling the following: > Access to fetch at > 'https://coder.example.com/api/v2/applications/auth-redirect' from origin > 'https://8000--dev--user--apps.coder.example.com' has been blocked by CORS > policy: No 'Access-Control-Allow-Origin' header is present on the requested > resource. If an opaque response serves your needs, set the request's mode to > 'no-cors' to fetch the resource with CORS disabled. #### Headers Below is a list of the cross-origin headers Coder sets with example values: ``` access-control-allow-credentials: true access-control-allow-methods: PUT access-control-allow-headers: X-Custom-Header access-control-allow-origin: https://8000--dev--user--apps.coder.example.com vary: Origin vary: Access-Control-Request-Method vary: Access-Control-Request-Headers ``` The allowed origin will be set to the origin provided by the browser if the users are identical. Credentials are allowed and the allowed methods and headers will echo whatever the request sends. #### Configuration These cross-origin headers are not configurable by administrative settings. If applications set any of the above headers they will be stripped from the response except for `Vary` headers that are set to a value other than the ones listed above. In other words, CORS behavior through the dashboard is not currently configurable by either admins or users. #### Allowed by default
From Alice Bob
Workspace 1 Workspace 2 Workspace 3
To App A App B App C App D
Alice Workspace 1 App A ✅ ✅* ✅* ❌
App B ✅* ✅ ✅* ❌
Workspace 2 App C ✅* ✅* ✅ ❌
Bob Workspace 3 App D ❌ ❌ ❌ ✅
> '\*' means `credentials: "include"` is required ## SSH First, [configure SSH](../ides.md#ssh-configuration) on your local machine. Then, use `ssh` to forward like so: ```console ssh -L 8080:localhost:8000 coder.myworkspace ``` You can read more on SSH port forwarding [here](https://www.ssh.com/academy/ssh/tunneling/example).